How to Switch MMPs in 2027 Without Losing Historical Data

H
Hyunjong ChoiGTM Lead
··10 min read
Share
How to Switch MMPs in 2027 Without Losing Historical Data

Key takeaways

  • History does not move between MMPs. Export reports from the old tool before your contract ends.
  • Run both SDKs in parallel, and let only one MMP send conversions to each ad network.
  • A basic Airbridge SDK install takes about 5 minutes. Testing and the parallel run take weeks, not minutes.
  • Airbridge Core's 14-day trial has no usage limit and needs no card. In our timeline it covers the setup week and the first week of the parallel run.
  • Core connects Meta Ads, Google Ads, Apple Ads, and TikTok for Business. Other networks need the Growth plan.
On this page

To switch MMPs without losing historical data, export what you need before access ends, run both tools side by side for a while, and move ad network connections in a planned order. Your old mobile measurement partner (MMP) will not hand its history to your new one. Attribution starts fresh on the day the new SDK goes live.

This guide gives you the steps in that order. Airbridge publishes this blog, so we use Airbridge Core ($40+/mo after a 14-day free trial) as the example for the new MMP. The steps work for any vendor.

At a glance (as of November 2026)

  • History does not move between MMPs. Export reports from the old tool before your contract ends.
  • Run both SDKs in parallel, and let only one MMP send conversions to each ad network.
  • A basic Airbridge SDK install takes about 5 minutes. Testing and the parallel run take weeks, not minutes.
  • Airbridge Core's 14-day trial has no usage limit and needs no card. In our timeline it covers the setup week and the first week of the parallel run.
  • Core connects Meta Ads, Google Ads, Apple Ads, and TikTok for Business. Other networks need the Growth plan.

What moves, what do you rebuild, and what stays behind?

Item What happens What to do
Aggregate reports (installs, events, revenue by campaign) Stays in the old tool Export to CSV or Sheets before access ends
Raw event logs Stays in the old tool Export them if your old plan includes raw data access
Event names and parameters You rebuild them Map them to the new tool's events (step 3)
Ad network connections You rebuild them Connect each network in the new tool (step 5)
SKAN conversion value schema You rebuild it Write it down, then set it up again (step 6)
Deep links and short links You rebuild them Create new links; keep old ones working until replaced (step 7)
Attribution of past installs Does not move The new tool attributes from its go-live date onward
Cohorts, retention curves, LTV views Stays in the old tool Export the data behind them

The 10 steps

1. Read your old contract

Find the end date, the notice period, and what happens to your data after you leave. Note how long you keep dashboard access. Your plan for export and parallel tracking depends on these dates.

2. Export everything you might need later

Export aggregate reports by campaign, channel, and month. Export raw logs if your plan allows it. Take screenshots of saved reports and dashboards you want to rebuild. Store the files somewhere your team owns.

3. Map your events

List every event you send today. Then map each one to the new tool. Airbridge Core uses 25 standard events, such as Install, Sign Up, Purchase, Start Trial, Subscribe, and Unsubscribe. Core does not support custom events. If you rely on an event that has no standard match, you need the Growth plan.

For subscription apps that use RevenueCat, Adapty, or Superwall, the integration maps lifecycle events for you:

Subscription tool event Airbridge Core event
Trial start Start Trial
Initial purchase, trial conversion, renewal Subscribe (all three)
Cancellation or auto-renew turned off Unsubscribe
Expiration, billing issue, refund Custom events, Growth plan only

4. Install the new SDK next to the old one

Add the new SDK to a test build. Keep the old SDK in place. A basic Airbridge install takes about 5 minutes. There are SDKs for 8 mobile platforms. Check that both SDKs start, that events reach both tools, and that crash rates do not change.

5. Connect your ad networks and cost data

Check that every paid channel you use is supported. Airbridge Core connects Meta Ads, Google Ads, Apple Ads, and TikTok for Business, including cost data for those four. For other spend, such as creators, you can upload costs as a CSV file. If you buy on other networks, plan for the Growth plan, which covers 330+ channels.

6. Rebuild your iOS setup

Set up your SKAN conversion values again in the new tool. Airbridge Core includes SKAN 3.0/4.0 reporting and a conversion value manager. Write down the schema from your old tool first, then set it up the same way, so iOS data stays comparable across the switch.

Create new tracking links and deep links in the new tool, on a custom domain you own. Airbridge Core includes a tracking link manager and API. On Airbridge, deep linking">deferred deep linking works for 1 hour after the click. Keep old links live until you have replaced them in ads, emails, QR codes, and share flows.

8. Run both tools in parallel

Ship the build with both SDKs. Compare installs, key events, and revenue between the tools each day. The numbers will not match exactly, because tools can use different lookback windows and matching methods. On Airbridge, the click lookback defaults to 7 days for device ID matching and 1 day for probabilistic matching. You can change it from 0 minutes up to 30 days. Set it to match your old tool before you compare.

During this time, let only one MMP send conversion data to each ad network. If both send the same conversions, the network's optimization can count them twice.

9. Cut over

Move each ad network's conversion connection to the new MMP. Point new campaigns at the new links. Watch a few days of clean data in the new tool before you go further.

10. Remove the old SDK and end the contract

Ship a build without the old SDK. Do a final export from the old tool. Then end the contract on the date you found in step 1.

Want to see how Switch MMPs works with your data?

Get hands-on with Airbridge and see real results.

Try It Free →

A suggested timeline

This is our suggestion for a small team with one engineer. Adjust it to your volume and contract dates.

Week Steps Notes
1 1, 2, 3 Contract review, export, and event mapping
2 4, 5, 6, 7 Test build, ad networks, SKAN, links. Airbridge trial starts
3 to 4 8 Parallel run. The 14-day trial ends around here
5 9 Cutover, one network at a time
6 10 Old SDK removed, contract ended

What you will see in the Airbridge dashboard

Once data flows, these Core reports replace the views you used in your old tool:

Report What it shows Tip for the switch
Actuals Installs and events by channel and campaign, plus Cost (Channel), Clicks (Channel), and Impressions (Channel) Counts only events inside the attribution window. Use it for daily parallel checks
Revenue Report Revenue by campaign. Also shows CAC, defined as total ad spend divided by Start Event users Credits each revenue event to the most recent Start Event, with no window. For RevenueCat revenue, pick Subscribe as the Revenue Event
Retention How many users come back On Core, Subscribe can be the Return Event
Funnel Drop-off between steps, such as Install, Start Trial, Subscribe Rebuild the funnel you tracked before
Trend and Active User Changes over time and active users Compare against your exported history
SKAN reports iOS SKAdNetwork results Check after your conversion values are live
Predictive LTV Predicted value up to day 180 Dashboard only, not sent to ad networks. See Predictive LTV for AI apps

Because the Revenue Report and Actuals use different rules, their numbers differ. Pick one for each question and stay with it. You can export reports to Sheets or CSV.

How much does it cost to run both tools?

During the parallel run, you pay for both. The Airbridge side works like this:

  • Days 1 to 14: the 14-day trial, which starts in week 2 of our timeline. No card and no usage limit. Without a card, there is no charge, but access stops on day 14, in the middle of the parallel run, and the dashboard shows an option to resume. With a card, the plan continues as paid.
  • After the trial: Core costs $40+/mo, billed monthly in advance, with 500K data points included and $0.0001 per extra data point.
  • What counts: one data point is one event your app sends to Airbridge. Installs count. Tracking-link clicks and impressions do not.

Example with assumed numbers: an app with 80,000 monthly active users that sends 10 events per user per month creates 800,000 data points. That costs $40 + 300,000 × $0.0001 = $70 for the month. Your own events per user decide the bill, so use your trial volume. See MMP free trials and monthly billing for mobile attribution.

Common mistakes

  1. Cutting over in one day. With no parallel run, you cannot tell a setup error from a real difference.
  2. Exporting too late. Once access ends, the history is gone. Export in week 1.
  3. Two MMPs sending the same conversions to one network. Move each connection once, at cutover.
  4. Comparing with different lookback windows. Match the windows before you judge the numbers.
  5. Forgetting links. Old short links in emails and QR codes may stop working when the old contract ends. Replace them first.
  6. Ignoring channel coverage. If you buy on networks outside Meta, Google, Apple Ads, and TikTok, Airbridge Core will not cover them.
  7. Switching in your busiest month. Pick a month with steady spend, so campaign changes do not hide data issues.

Where Airbridge Core helps, and where it does not

Core is self-serve. No sales call is needed, and you can cancel from the dashboard at any time with no minimum term. That makes it easy to test during a switch. See MMP contracts with no lock-in and setup without sales. It also includes Airbridge MCP (beta), which lets you ask Claude, Claude Code, ChatGPT, or Codex questions about your reports. See AI agents and attribution.

Core has limits that matter in a migration. It has no dedicated CSM or migration support, no raw data export, no fraud detection, and no custom events. Those are on the Growth plan. Core support is ticket-based, plus the help center. If you want hands-on migration help, talk to Airbridge about Growth.

Comparing tools first? See Adjust alternatives, AppsFlyer alternatives, and Branch alternatives.

FAQ

How long does it take to switch MMPs?

The SDK install is fast. A basic Airbridge install takes about 5 minutes. The full switch takes longer, because you export data, rebuild links and SKAN, and run both tools in parallel. Our suggested plan above takes about six weeks for a small team.

Will I lose historical attribution data?

You keep it only if you export it. Your new MMP attributes installs from its go-live date onward. It does not re-attribute past installs.

Can I run two MMPs at the same time?

Yes, and you should. Run both SDKs and compare daily. Let only one MMP send conversions to each ad network.

Do I have to rename my events?

You map them. On Airbridge Core, you use the 25 standard events. If an event has no standard match, it needs a custom event, which is on the Growth plan.

Will the numbers match between the old and new MMP?

Not exactly. Tools can use different attribution windows and matching methods. Match the lookback windows first, then look for differences that stay large over several days.

Start the 14-day free trial

Ready to transform your mobile growth?

Learn how Airbridge helps leading brands measure and optimize every touchpoint.

“Braze is a powerful tool on its own, but when paired with Airbridge, it creates synergies for retargeting campaigns, saving resources and enhancing performance.”
CRM Marketing Team, Greenlabs · CRM Marketing Team, Greenlabs · Greenlabs
View Case Studies